Introduction

Reality capture technology plays a crucial role in modern construction projects, seamlessly integrating into different stages of the concrete pouring workflow. This advanced tool offers real-time, unbiased documentation, ensuring precision and efficiency in construction processes.

Challenge

Concrete pouring is a complex task with various factors influencing its success, including weather conditions, equipment arrangement, and adherence to quality standards. Disputes often arise regarding the concrete’s quality and whether it meets specified requirements. These disputes can lead to financial setbacks, delays, and a loss of trust among stakeholders.

Using reality capture technology as a solution

Reality capture technology has been integrated seamlessly into concrete pouring workflows to address these challenges. By employing drones to monitor site layouts and potential obstacles before pouring, real-time monitoring of weather conditions for precise timing, and construction cameras for quality control documentation during the pouring process, this technology provides an efficient and reliable solution. Furthermore, continuous monitoring during the curing stage, complemented by live-streaming options, enhances stakeholder engagement and allows for timely adjustments to maintain optimal curing conditions.

Results

Two case studies exemplify the effectiveness of reality capture technology in resolving disputes and reinforcing trust in concrete pouring processes.

Case Study 1: Resolving Substandard Concrete Quality Dispute

In a past project, a dispute arose over alleged substandard concrete quality. Reality capture, including time-lapse videos, was employed to comprehensively review the construction process. The captured data aided in identifying potential sources of defects and provided crucial evidence for resolution. This approach prevented a potential project setback and ensured adherence to quality standards.

Case Study 2: Validating Concrete Pouring Best Practices

During a concrete pour on the 5th floor of a construction project, concerns were raised about the concrete’s quality. Reality capture technology, specifically Evercam’s platform, was employed to showcase adherence to industry best practices through real-time, step-by-step validation of the pouring process. This comprehensive documentation dispelled doubts, prevented potential financial setbacks, and reinforced trust in the project’s quality and compliance.

 

Conclusion

The integration of reality capture technology in concrete pouring workflows is a significant advancement for the construction industry. It not only enhances efficiency and precision but also serves as a vital tool for conflict prevention and resolution.

Through real-time documentation and stakeholder engagement, reality capture technology fosters transparency and cooperation, significantly impacting the construction industry’s future by reducing disputes and ensuring project success.

In a world where information demands continue to increase, the need for data centres is growing fast. This surge has led to the growth of dedicated facilities and the emergence of new players in the market. Thor Equities has launched Form8tion Data Centers, a company that focuses on creating custom data centre solutions. Their approach is unique, catering to individual client needs rather than a one-size-fits-all model.

Their first major project, Madrid One, located in Fuenlabrada, Madrid, spans 70 acres and includes five independent data centres. The project, valued at approximately €600 million, emphasizes sustainable practices, such as low-carbon materials, water conservation, and renewable energy sources.

A closer look at the architectural renderings of this facility reveals five independent data centers spread across a 70-acre landscape. Spearheading this venture are industry veterans – Simon Burrage and Roy Gibbens. Their collective expertise ensures that Madrid One is not just about scale but also about integrating cutting-edge technology and sustainable practices.

Madrid One at a Glance:

Project Name:	Madrid One Campus
Project Type/Size:	Data Center (60,000 sqm)
Construction Type:	New
Estimated Value:	Approx €600 million
Sector:	Private
Details:	Campus spans 60,000 square meters with over 100MW capacity. The design boasts five buildings on 70 acres. The initial phase will deliver 18MW capacity. The entire campus will scale to over 100MW.
Stage:	In Progress
Construction Start:	Q3 2023
Construction End:	Not specified

Sustainability Practice 

Madrid One’s design includes advanced sustainability practices like rainwater harvesting and low-water cooling solutions. It also plans to use renewable energy and energy-efficient equipment to reduce its environmental impact.

Evercam’s technology significantly contributes to the sustainability goals of the Madrid One project by Form8tion Data Centers. Their solar-powered cameras provide an eco-friendly monitoring solution, reducing the reliance on traditional power sources. The AI-powered vehicle tracking system minimizes emissions by optimizing logistics and material transport. These innovative features from Evercam align perfectly with the project’s commitment to a net-zero carbon footprint, reinforcing Madrid One’s position as a leader in sustainable data center construction.

The Madrid One project, with its scale, vision, and integration of advanced solutions including Evercam Reality Capture, is set to be a benchmark in the data center industry. Form8tion and Evercam have recognized the synergies in their respective visions and are committed to a long-term partnership. The collaboration is not just about the present but is rooted in a shared vision for the future of the data center industry.

Download this Case Study

Evercam’s implementation of its reality capture solutions has played an integral role in a Manufacturing Automation & Robotic Transformation (SMART) laboratory, packaging development lab, and office project in Singapore. Undertaken by a Fortune 500 company specialising in agricultural science and technology, the incorporation of Evercam has transformed the strategies related to safety protocols, inter-team communication, and overall project administration.

Given the pressing challenge of limited space in the project, the team strategically installed construction cameras across the site to overcome this constraint. As a result of this setup, the team gained the advantage of real-time visibility and monitoring capabilities, which improved the adherence to safety protocols and helped in managing incident resolution. Consequently, the strategic placement of the cameras not only addressed the challenge of spatial limitation but also enriched safety management processes.

• “The integration of Evercam’s reality capture technology was a game-changer for our SMART Lab project. It changed the way we approached safety, communication, and project monitoring. The enhanced visibility and real-time monitoring capabilities empowered us to prevent incidents and promptly resolve potential issues, leading to improved safety outcomes. Evercam has become an invaluable asset in our construction endeavours, and we highly recommend it to any company looking to elevate their projects to the next level.” ~Engineering Manager

Moreover, the seamless integration of Evercam with the Procore project management software bolstered communication and collaboration across all project stakeholders. The shared access to project documents and an increase in monitoring capabilities resulted in substantial improvements in efficiency and productivity.

The quantifiable success of Evercam’s implementation is evident in key performance indicators. A marked decrease in safety incidents coupled with an increase in safety observations underscore the positive impact of Evercam’s reality capture solution. Financial metrics also demonstrate considerable cost savings arising from immediate issue detection and the prevention of expensive delays or reworks.

 

Evercam’s collaboration with Echelon on the DUB10 project in Dublin exemplifies the transformative power of innovative technology solutions in data center construction. With a focus on sustainability and operational excellence, Echelon aimed to minimize rework and enhance construction efficiency. Evercam’s comprehensive reality capture solutions, including site visibility, team communication, gate report and traffic control, 4D BIM, and drone view capabilities, effectively addressed these challenges, revolutionizing industry standards.

By providing live remote access and unifying visual construction data, Evercam’s platform significantly improved site visibility and streamlined team communication, resulting in reduced travel time and costs. The 24/7 full-frame-rate recording capability offered comprehensive documentation of the project, facilitating incident management, dispute resolution, and informed decision-making. Additionally, Evercam’s gate report helped with traffic control and optimized vehicle movements, eliminating overcharging, and substantially reducing the carbon footprint associated with vehicles at the construction site.

The integration of Evercam’s 4D BIM solution empowered the entire team with access to planning versus reality comparisons, enhancing flexibility and efficiency in the construction process. The remote measurement capability allowed for precise planning and execution, while the drone view feature provided an immersive 3D visualization of the construction site. Accurate measurements of distances, heights, and areas facilitated real-time project progress monitoring, timely issue identification, and improved communication within the team.

Beyond operational efficiency, Echelon utilized Evercam’s resources, including professionally edited time-lapse videos, to effectively market the ongoing progress of the DUB10 project. These captivating clips condensed months of construction work, highlighting the project’s magnitude and precision. The successful implementation of Evercam’s reality capture solutions in the DUB10 project led to substantial benefits, including a significant reduction in rework, cost savings, environmental sustainability, compliance with local environmental planning commitments, and reduced idle time for heavy machinery and concrete trucks.

The DUB10 project serves as a pioneering example of the integration of advanced technology in data centre construction, with Evercam at the forefront of driving industry transformation. The successful outcomes achieved through the implementation of Evercam’s innovative reality capture solutions have set a new benchmark for efficiency, communication, and safety. As the project nears completion, the impact of Evercam’s solutions reinforces its role as a key partner for future advancements in the field, redefining the construction landscape.

 

Sisk, a leading European construction company, has partnered with Evercam to transform their site management practices. By embracing digital technologies and leveraging Evercam’s construction cameras, Sisk has streamlined work practices, improved communication, and increased productivity.

The integration of Evercam with Sisk’s common data environment and BIM models enables efficient information management and progress tracking. The software’s data analysis and reporting features, such as the Gate Report, have reduced costs and delays while empowering Sisk’s digital project delivery.

Furthermore, Evercam’s video footage has supported continuous improvement and enhanced energy efficiency within Sisk’s projects. The company has achieved a significant reduction in energy consumption and has used Evercam’s recordings to investigate and address issues such as excess energy usage.

This successful partnership between Sisk and Evercam has resulted in shared innovation and practical solutions for the construction industry. Sisk’s adoption of Evercam’s technology has positively impacted their projects, demonstrating the potential of digital transformation in site management.

 

This case study examines Murphy Ireland’s utilization of Evercam’s innovative construction camera technology for their Ringsend Phosphorous Fixation and Recovery Project. The project involves the construction of the Ringsend Wastewater Treatment Plant in Ireland, aiming to reduce phosphorus released in treated effluent and recover it for sustainable fertilizer production. To address the challenges of managing multiple projects across different locations and site constraints, Murphy Ireland implemented Evercam Construction Cameras for remote project monitoring and documentation.

The integration of construction cameras and Building Information Modeling (BIM) provided benefits such as remote monitoring, live view, video recording, and overlaying BIM models with real-time images. The cameras facilitated construction sequencing, off-site fabrication, assembly logistics, access planning, and communication with the plant owner.

The project achieved significant milestones, including the successful lifting of the Pearl reactor, and the 4D construction simulation received positive feedback. Future steps involve leveraging machine learning, AI, and further integrating 4D construction sequencing into everyday work. Evercam’s software played a crucial role in planning and implementing construction activities, providing transparency, responsibility, and access to reports and BIM data for the project team.

Overall, the deployment of Evercam’s technology enhanced remote project management, coordination, and construction efficiency for the Ringsend project.

 

DB Schenker, a logistics company, successfully completed the construction of a sustainable 220,000-square-foot facility in Co. Kildare, Ireland. The facility, designed to meet LEED Gold certification standards, showcased DB Schenker’s commitment to sustainability and eco-friendly construction practices.

To ensure the project’s success, DB Schenker utilized construction cameras connected to a cloud-based platform for real-time monitoring and progress documentation. The cameras helped DB Schenker achieve its sustainability goals and maintain construction efficiency.

The Gate Report feature provided comprehensive insights into vehicle activity, facilitating cost control and independent validation of invoices. Integration with Matterport allowed for a 360º internal view, ensuring sustainability objectives were met. Evercam’s drone view provided a comprehensive overview of the construction project, while 4D simulation software enabled real-time visualization of the construction process.

By comparing the actual progress with the planned timeline using 4D BIM Compare, DB Schenker effectively monitored the project and made necessary adjustments.

The use of construction cameras helped DB Schenker achieve its sustainability goals, including reducing carbon emissions and implementing energy-efficient technologies. This case study highlights the benefits of construction cameras in sustainable construction and DB Schenker’s commitment to eco-friendly practices.

To embrace sustainable construction practices and achieve your own sustainability goals, consider implementing construction cameras connected to cloud-based platforms. These tools can provide real-time monitoring, documentation, and insights that help streamline construction processes while reducing environmental impact. Start incorporating these technologies today and contribute to a greener future for the construction industry.